Revisiting the Garden Gnome House

The garden gnome house was carved out of a solid poplar log that fell during a windstorm. Poplar is not the best wood for carving — it splits and rots easy — but it was big, free, and delivered from the sky in our backyard.

The garden gnomes have their house in a raspberry patch with a waterfall flowing just below the winding staircase.

A Stihl MS261c with the factory bar was used. That’s a mid-sized saw that idles well so the chain can chew slowly without too much gas. This allows for more detail work without revving the saw to high speed. The smaller bar on a MS170 was used to notch out the stairs. See more here…

.

So how did it do after a year in the sun, wind, rain, and snow? Not too bad considering it had two litres of linseed oil dumped on it. There was some cracking and a polyurethane glue was injected into the deepest splits. The wood was also stained anywhere water collected. Time for another coat of clear sealer or linseed oil as winter approaches.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.